Trellis Gates
Our gates are custom made to your space. Normally we allow 50mm inside of the posts to allow 25mm for our self closing hinges and 25mm for the latch. The standard gate has steel corner braces, a cutout for the hand, a diagonal brace, 3 self closing hinges and a D-Latch. They are great, light and fit for purpose however if you need a wider opening or a high use gate we typically would advise to use a steel framed gate, which we can look into for you. The key point for a gate is knowing that your gate posts are good for the job and that the opening is the same at the bottom as the top. We would love to help you with your gate query.
-
It is great for privacy screens or to bring a nice change to your property’s fencing.
Each Oriental panel we build is custom spec so you can request any dimension you need.
-
We stock 2 battens:
Our standard batten is approximately 30mm x 9mm – it is a good quality, smooth batten however it does have some light defects and non-uniformity. It is a great product for trellis fencing and 95% of the time this is what we use. The actual dimensions are 29mm x 9mm when we are asked to be specific.
Our premium batten is 38mm although it can often be measured as 36mm. This batten carries a 10% premium on price.
-
With each of our designs there is the ability to have the product framed or unframed. If you are needing a frame around the product (we refer to the framing as u-mould, framing, or capping) then it is far more efficient to include it in your build as it will save you time and money.
We only stock 1 frame which is 45cm x 45cm and is a nice, smooth, high quality timber. Although it can have some light defects it is what we consider a great timber for what we do.
Features
We only use stainless steel staples.
We maintain a high quality of timber throughout our timber yards.
Our frames are screwed as opposed to stapled.
We only use 45cm x 45cm framing as it has a good structure and “meat” so that we can screw into it. And it has the best durability.
Every trellis panel is custom made and we work with a +/- 3mm tolerance.
“Auckland Trellis have many years of experience as designers and builders of high-quality cost-effective trellis fences. We cover all of Auckland, including the North Shore, West Auckland, East Auckland and South Auckland.”
For all pricing, please click here
